Taidacent NPN M12 Through Beam Photoelectric Sensor Infrared Beam Motion Detector Proximity Switch Photocell Beam Sensor (Laser Beam Sensor Anti-Sunlight Interference)

Model: M12-3m infrared on the radio Detection distance: 3 meters Shell material: copper tube Working environment: indoor and outdoor, not waterproof, with anti-sunlight interference Detection object: non-transparent object Indicator light: with indicator light Control output (output format): NPN open collector output Light use range: strong anti-interference performance, sunlight can be used Connection method Emission: Red wire = positive VCC black wire = negative GND Receiving: Red wire = positive VCC black wire = negative GND yellow wire = signal wire OUT (NPN) The "light" of the infrared switch: infrared has no beam line and no spot Model: M12-20m laser beaming Detection distance: 20 meters Shell material: copper tube Output mode: NPN normally open (output 5V voltage when there is an object obstructed, 0V when no object obstructs) Working environment: Not waterproof, this product is divided into anti-sunlight interference (both indoor and outdoor) and non-anti-interference Laser spot size: adjustable spot Detection object: non-transparent object Indicator light: with indicator light Control output (output format): NPN open collector output Scope of light usage: strong anti-interference performance and sunlight can be used. There are anti-interference (indoor and outdoor) and non-anti-interference (indoor and outdoor) Connection method Emission: Red wire = positive VCC black wire = negative GND Receiving: red wire = positive VCC black wire = negative GND yellow wire = signal wire 0UT (NPN) The "light" of the laser switch: In actual use, only the light spot can be seen in the daytime when there is light/sunlight, and the red line of the light beam can only be seen in the dark.

• Working voltage: conventional 5V voltage (other voltage consultation can be ordered)
• Detection method: through-beam
• Appearance size: diameter 12MM, length 30MM
• Wire length: conventional 80cm (wire length can be customized)
• Output mode: NPN normally open (5V voltage output when there is an object obstructed, 0V when there is no obstruction)